This morning I submitted a formal request to CISA to conduct Physical Configuration Audits (PCAs) of the electronic voting systems in numerous communities throughout Michigan.
Title 6 Section 659 grants CISA the authority to conduct such examinations upon request of local officials. Local officials have made such requests as have I as a former Michigan State Senator.
We have evidence of Wi-Fi hotspot tied to a voting machine in use to support early voting. The PCA would determine if a modem was installed on the voting machine. This observation could be used as a predicate to examine network communication logs that would confirm remote transmissions that compromise election security.
Communications of election results prior to closure of polls on election day is a felony violation of Michigan law (MCL 168.765a(13)). Any machine capable of doing so would not only violate the machine certification requirements, it would also call into question the certification of any election conducted that depends upon results produced by these machines.
NOTE: Recounts are insufficient to detect any manipulation of election results compromised by the use of machines capable of remote transmissions. Any bad actor with privileged access to election results prior to election day would be able to use that information to determine how many fake ballots would need to be inserted to address any gaps between actual results and their projected results. Fake ballots can be injected in a variety of ways by individuals with access to a list of low propensity or illegal voters in the state Qualified Voter File (QVF). The most obvious involves unsupervised poll workers at Early Voting sites fraudulently assigning voters to ballots in the QVF, then printing ballots on demand and inserting them into tabulators. Recounts are useless in the detection of fake ballot injections. Voters who show up to vote in person on election day and are told that they already voted provide one means of detecting such fraud but it is rarely investigated.
Attached are photos which provide a sample of the evidence that I have in support of my PCA request. They include a photo of the product labeling for the certified "Made in USA" configuration and non-certified "Made in Taiwan" product labeling. I have also included a sample of the Wi-Fi hotspot evidence in my possession (and the possession of federal and state officials).
Welcome to the wonderful engineering world of Configuration Management ;)
<blockquote class="twitter-tweet"><p lang="en" dir="ltr">BREAKING: This morning I submitted a formal request to CISA to conduct Physical Configuration Audits (PCAs) of the electronic voting systems in numerous communities throughout Michigan. Title 6 Section 659 grants CISA the authority to conduct such examinations upon request of local officials. Local officials have made such requests as have I as a former Michigan State Senator. We have evidence of Wi-Fi hotspot tied to a voting machine in use to support early voting. The PCA would determine if a modem was installed on the voting machine. This observation could be used as a predicate to examine network communication logs that would confirm remote transmissions that compromise election security. Communications of election results prior to closure of polls on election day is a felony violation of Michigan law (MCL 168.765a(13)). Any machine capable of doing so would not only violate the machine certification requirements, it would also call into question the certification of any election conducted that depends upon results produced by these machines. NOTE: Recounts are insufficient to detect any manipulation of election results compromised by the use of machines capable of remote transmissions. Any bad actor with privileged access to election results prior to election day would be able to use that information to determine how many fake ballots would need to be inserted to address any gaps between actual results and their projected results. Fake ballots can be injected in a variety of ways by individuals with access to a list of low propensity or illegal voters in the state Qualified Voter File (QVF). The most obvious involves unsupervised poll workers at Early Voting sites fraudulently assigning voters to ballots in the QVF, then printing ballots on demand and inserting them into tabulators. Recounts are useless in the detection of fake ballot injections. Voters who show up to vote in person on election day and are told that they already voted provide one means of detecting such fraud but it is rarely investigated. Attached are photos which provide a sample of the evidence that I have in support of my PCA request. They include a photo of the product labeling for the certified "Made in USA" configuration and non-certified "Made in Taiwan" product labeling. I have also included a sample of the Wi-Fi hotspot evidence in my possession (and the possession of federal and state officials). Welcome to the wonderful engineering world of Configuration Management ;) @RealLindellTV @CISAgov @elonmusk @realMikeLindell @DataRepublican @EmeraldRobinson @StephenM @Curiousityfirst</p>— Patrick Colbeck✝️ (@pjcolbeck) <a href="https://x.com/pjcolbeck/status/2121255548804837427?ref_src=twsrc%5Etfw">November 13, 2026</a></blockquote> <script async src="https://platform.x.com/widgets.js" charset="utf-8"></script>
BREAKING: Today, as a former Michigan State Senator and a Wayne County resident, I formally asked the Wayne County Board of Canvassers to require a Physical Configuration Audit (PCA) of our voting machines before the 2026 election results are certified. A PCA is a hands-on inspection that checks whether the hardware, software and network configurations of machines actually in use match the machines that were tested and approved. What I found: - The voting machines I personally inspected during pre-election testing in Canton, Livonia and Detroit don't match the unit tested for certification. - The tested unit is labeled "Made in USA." - The machines in use in Wayne County are labeled "Made in Taiwan." They also come from a different serial-number series and carry a later circuit-board revision. The factory that built them has not been publicly identified. - Dominion's own internal parts list, prepared in wake of their testimony before Congress in 2020, showed that about 48% of the parts in this tabulator model came from China. Dominion is now owned by Liberty Vote. - Michigan's 2019 state certification report described a modem-equipped tabulator configuration alongside the federal certificate. That federal certificate listed modems as not supported, and the modem-equipped model was not on its list of certified hardware. - The only public hardware test record for this tabulator shows a "Made in USA" unit. I have found no public record that the "Made in Taiwan" units now in use were tested for certification. Why it matters: - If any of these machines contain communication hardware that isn't in the certified configuration, such as a hidden modem, the chain of custody for the 2026 election can't be fully verified. The Board would then have no physical proof that results weren't accessed or changed before polls closed. - "Made in Taiwan" units of the same model have also been documented in Barry County and Allegan County, so this goes beyond Wayne County. - Similar configuration mismatches have been found in other states. I have also submitted formal Requests for Investigation to federal authorities. My hope is simple: a transparent, professional PCA of Wayne County's tabulators, with the results shared with the public. #2026Election H/T Narelle @RealLindellTV @realMikeLindell @MikeGarafolo @MrJustinBarclay @TrueTheVote @PatrickByrne @Curiousityfirst @TruckerRandy @AttyStefLambert @DHSgov @PeterTicktin @SheriffLeaf
— Patrick Colbeck✝️ (@pjcolbeck) November 12, 2026
What I found:
- The voting machines I personally inspected during pre-election testing in Canton, Livonia and Detroit don't match the unit tested for certification.
- The tested unit is labeled "Made in USA."
- The machines in use in Wayne County are labeled "Made in Taiwan." They also come from a different serial-number series and carry a later circuit-board revision. The factory that built them has not been publicly identified.
- Dominion's own internal parts list, prepared in wake of their testimony before Congress in 2020, showed that about 48% of the parts in this tabulator model came from China. Dominion is now owned by Liberty Vote.
- Michigan's 2019 state certification report described a modem-equipped tabulator configuration alongside the federal certificate. That federal certificate listed modems as not supported, and the modem-equipped model was not on its list of certified hardware.
- The only public hardware test record for this tabulator shows a "Made in USA" unit. I have found no public record that the "Made in Taiwan" units now in use were tested for certification.Why it matters:
- If any of these machines contain communication hardware that isn't in the certified configuration, such as a hidden modem, the chain of custody for the 2026 election can't be fully verified. The Board would then have no physical proof that results weren't accessed or changed before polls closed.
- "Made in Taiwan" units of the same model have also been documented in Barry County and Allegan County, so this goes beyond Wayne County.
- Similar configuration mismatches have been found in other states.I have also submitted formal Requests for Investigation to federal authorities.
Replies
Every state should be federally audited NOW.
How about all states?